TCL 60 Xe Nxtpaper eSIM

Does the TCL 60 Xe Nxtpaper support eSIM?

TCL 60 Xe Nxtpaper eSIM compatibility

Yes, the TCL 60 Xe Nxtpaper supports eSIM. The device uses a Nano-SIM plus eSIM configuration, giving you dual-SIM capability out of the box. You can run one physical Nano-SIM card alongside one active eSIM profile at the same time.

This compatibility applies to all TCL 60 Xe Nxtpaper models. The phone supports 5G connectivity on both the physical SIM slot and the eSIM, so you won't lose network speed by choosing an eSIM for your primary or secondary line. Whether you buy the TCL 60 XE NXTPAPER 5G from a carrier or unlocked, the eSIM functionality is built into the hardware.

Dual SIM: eSIM plus physical SIM

The TCL 60 Xe Nxtpaper lets you use one physical Nano-SIM and one eSIM simultaneously. You can assign different roles to each line—for example, keep your home carrier on the physical SIM for calls and texts, and load a travel eSIM for mobile data when you're abroad. The phone does not support dual eSIM (two eSIM profiles active at once); you're limited to one eSIM and one physical SIM in active use, though you can store multiple eSIM profiles and switch between them in settings.

How to set up an eSIM on the TCL 60 Xe Nxtpaper

Set up an eSIM in Settings

Setting up an eSIM on your TCL 60 Xe Nxtpaper takes about sixty seconds. You'll need a QR code from your carrier or eSIM provider and a Wi-Fi or mobile-data connection to download the profile. Follow these steps:

Open Settings and tap Network & internet.
Tap SIMs or Mobile network.
Select Add SIM or Download a SIM (wording may vary slightly by Android build).
Tap Use QR code and point your camera at the QR code provided by your carrier or eSIM service.
Confirm the installation and wait for the profile to download—usually ten to twenty seconds.
Label the new eSIM line (for example, "Travel Data" or "Work") so you can tell your SIMs apart.
Choose which SIM to use for mobile data, calls, and SMS in the SIM settings menu.

Once installed, the eSIM appears alongside your physical SIM in the SIM manager. You can toggle each line on or off, set a default for data, and assign contacts to a specific line for outgoing calls.

Activate your eSIM profile

After the profile downloads, some carriers require you to restart the phone or wait a few minutes for the network to register. If the eSIM doesn't connect immediately, toggle airplane mode on and off, or restart the device. The eSIM will then show signal bars and a carrier name in your status bar.

Using a travel eSIM on the TCL 60 Xe Nxtpaper

A travel eSIM is the easiest way to get mobile data abroad without paying roaming fees or hunting for a local SIM card. Because the TCL 60 Xe Nxtpaper supports eSIM, you can install a data plan for your destination country before you leave home, then activate it the moment you land.

Purchase an eSIM plan that covers the region you're visiting—browse eSIM plans by country or region to compare coverage and data allowances. You'll receive a QR code by email; scan it using the steps above while you're still on Wi-Fi at home. The eSIM will sit dormant until you turn on data roaming for that line, so there's no risk of accidentally using it early.

When you arrive, go to Settings > Network & internet > SIMs and set the travel eSIM as your default for mobile data. Leave your home physical SIM active for calls and text messages (or turn it off if you want to avoid any roaming charges for voice). You'll have local data rates and full 5G speed without swapping physical cards or unlocking a SIM tray mid-flight.

Tips & troubleshooting

Turn on data roaming for the eSIM line

Even though you've installed the eSIM, you must enable data roaming for that specific line or it won't connect when you're outside your home country. Go to Settings > Network & internet > SIMs, tap the eSIM profile, and toggle Roaming to on. Don't worry—you're only turning on roaming for the prepaid eSIM plan, not your primary carrier, so you won't incur surprise charges on your home account.

Keep the home SIM for calls and two-factor authentication

Many banking apps and services send verification codes by SMS to your home number. Leave your physical SIM active (but with mobile data turned off for that line) so you can still receive texts and calls. The TCL 60 Xe Nxtpaper will route data through the eSIM and voice through the physical SIM automatically if you configure it that way in the SIM preferences.

Fix an eSIM that won't activate

If the QR code won't scan—because of glare, a cracked screen protector, or low light—most eSIM providers also give you a manual activation code. In the add-SIM screen, tap Enter code manually and type the SM-DP+ address and activation code exactly as shown. If the eSIM downloads but shows no signal, confirm that the profile is turned on in SIM settings, restart the phone, and check that you haven't exceeded any data cap on a prepaid plan.

For additional help with eSIM setup on any device, visit our eSIM setup help page. You can also check another device's eSIM compatibility if you're considering a second phone or tablet for travel.

60 Xe Nxtpaper eSIM FAQ

Everything travellers ask about using an eSIM on the 60 Xe Nxtpaper.

Is the TCL 60 XE NXTPAPER 5G a good phone?

The TCL 60 XE NXTPAPER 5G offers a large NXTPAPER display designed to reduce eye strain, plus 5G connectivity and dual-SIM flexibility with eSIM support. It's a solid mid-range option if you prioritize battery life, a readable screen, and the convenience of switching carriers or adding travel data without a physical SIM. Performance and camera quality sit in the budget-to-midrange category, so it suits everyday tasks and media consumption more than intensive gaming or professional photography.

What is the disadvantage of eSIM?

The main disadvantage of eSIM is that you can't instantly move it to another phone by popping out a card—you need to request a new QR code from your carrier or delete and re-download the profile, which can take a few minutes or require customer support. Some smaller carriers and rural networks don't yet offer eSIM provisioning. Physical damage to the phone's motherboard can also make eSIM recovery harder than simply pulling a SIM card from a broken device.

How can I check if my device is compatible for eSIM?

Open Settings > About phone and look for an EID (embedded identity document) number—if you see a long string of digits labeled EID, your device has an eSIM chip. Alternatively, go to Settings > Network & internet > SIMs and see if there's an option to add or download a SIM; that menu won't appear on phones without eSIM hardware. You can also check the manufacturer's official spec sheet for "eSIM" or "embedded SIM" in the connectivity section.

Do TCL phones have eSIM?

Some TCL phones support eSIM, but not all models. The TCL 60 Xe Nxtpaper includes eSIM capability, as do select other recent TCL devices sold in certain markets. Older or entry-level TCL models typically use dual physical SIM slots without eSIM. Always confirm eSIM support in the official specifications for the exact model and regional variant you're buying, because TCL's lineup varies by carrier and country.

Can I use two eSIMs at the same time on the TCL 60 Xe Nxtpaper?

No, the TCL 60 Xe Nxtpaper supports one physical Nano-SIM and one eSIM active simultaneously, not two eSIMs at once. You can store multiple eSIM profiles on the device and switch between them in settings, but only one eSIM can be turned on alongside the physical card. If you need two lines, use the Nano-SIM slot for one carrier and the eSIM for the other.

Still have questions?

Our support team replies fast, 24/7.

Contact support

Does the TCL 60 Xe Nxtpaper support eSIM?