Xiaomi Redmi Note 14 Pro Plus 5g eSIM

Does the Xiaomi Redmi Note 14 Pro Plus 5g support eSIM?

Xiaomi Redmi Note 14 Pro Plus 5g eSIM compatibility

Yes, the Xiaomi Redmi Note 14 Pro Plus 5g supports eSIM. The device features a nano-SIM slot plus eSIM capability, giving you flexible dual-SIM options without needing two physical cards.

This configuration means you can insert one physical nano-SIM and activate one eSIM profile simultaneously. You'll run two mobile lines on the same device—perfect for separating work and personal numbers, or keeping your home number active while using a local data plan abroad.

Dual-SIM configuration on the Xiaomi Redmi Note 14 Pro Plus 5g

The Xiaomi Redmi Note 14 Pro Plus 5g supports dual standby. Both your physical SIM and eSIM remain active at the same time, so you can receive calls and messages on either line. You control which SIM handles mobile data through the settings menu, and you can switch between them as needed.

Unlike some phones that offer dual eSIM slots, this model is limited to one eSIM profile active at a time alongside the physical SIM. You can store multiple eSIM profiles on the device, but only one can be enabled concurrently with your nano-SIM.

How to set up an eSIM on the Xiaomi Redmi Note 14 Pro Plus 5g

Set up an eSIM in Settings

Setting up an eSIM on your Xiaomi Redmi Note 14 Pro Plus 5g takes about sixty seconds once you have your QR code from your carrier or eSIM provider. Follow these steps to activate your eSIM:

1. Open Settings and tap SIM cards & mobile networks.
2. Tap Add eSIM or Add mobile plan.
3. Select Scan QR code and point your camera at the QR code provided by your carrier or travel-eSIM provider.
4. Confirm the plan details and tap Add or Download.
5. Wait for the eSIM to activate—this usually completes within a minute if you have an internet connection.
6. Label the eSIM line (for example, "Travel" or "Work") so you can easily identify it.
7. Choose which SIM to use for mobile data and which for calls in the SIM card settings.

If your eSIM provider sends an activation code instead of a QR code, select Enter activation code manually in step three and type in the SM-DP+ address and activation code.

Managing your SIM lines

After installation, go back to SIM cards & mobile networks to manage both lines. You can toggle each SIM on or off, set a default for data, and assign specific contacts to dial out on a particular line. This control makes it easy to keep your home number for calls and texts while routing data through a travel eSIM when you're abroad.

Using a travel eSIM on the Xiaomi Redmi Note 14 Pro Plus 5g

A travel eSIM is the simplest way to get mobile data overseas without paying roaming fees. Instead of hunting for a local SIM shop at the airport, you install a data-only eSIM before you fly. The moment you land, you'll have data to navigate, book rides, and message home.

Because the Xiaomi Redmi Note 14 Pro Plus 5g supports nano-SIM plus eSIM, you keep your primary number in the physical slot and add a travel eSIM for data. Your home number stays reachable for calls and two-factor authentication texts, while the eSIM delivers affordable local data rates.

Install your travel eSIM while you're still at home and connected to Wi-Fi. Once installed, the profile sits dormant until you enable it and arrive in the destination country. When you need coverage, turn on the eSIM line and set it as your data source. You can browse eSIM plans covering single countries or entire regions, with data packages that match your trip length.

Many travelers on forums like Reddit appreciate the flexibility: no need to remove your physical SIM, and you can top up data remotely if you run low. The Xiaomi Redmi Note 14 Pro Plus 5g handles the dual-SIM setup smoothly, so switching between lines is quick.

Tips & troubleshooting

Turn on data roaming for your eSIM line

Even though you're using a local or regional eSIM, you still need to enable data roaming for that line in your settings. This confuses some users: "roaming" sounds expensive, but when the eSIM is from a local provider, roaming simply allows the profile to connect. Go to SIM cards & mobile networks, select your eSIM, and toggle Roaming on.

At the same time, turn off data roaming on your home SIM to avoid surprise charges. Keep that SIM enabled for calls and SMS, but route all data through the travel eSIM.

Fix an eSIM that won't activate

If the QR code won't scan, make sure your camera lens is clean and the code is displayed at full brightness. If scanning still fails, choose the manual entry option and type the activation details carefully—one wrong character will block installation.

If the eSIM profile downloads but shows "No service," confirm that you've enabled the line and set it as the active data SIM. Restart the phone to refresh the network connection. Some eSIM plans only activate once you reach the destination country, so the profile may appear inactive until you land.

If you continue to have trouble, check that your device software is up to date; early firmware versions occasionally have eSIM bugs that updates resolve. For persistent issues, reach out to eSIM setup help or contact your eSIM provider's support team.

Checking compatibility for other devices

If you're considering another phone or want to confirm eSIM support for a family member's device, you can check another device's eSIM compatibility in our directory. Not all Xiaomi or Redmi models include eSIM—many budget and mid-range models still rely on dual physical SIM trays—so always verify before you buy a plan.